Oakville Forklift Training School

Oakville Forklift Training School - Forklift Training School - Industry and federal regulators have established the criteria for forklift safety training according to their current regulations and standards. Individuals wanting to operate a forklift should complete a forklift training School prior to using one of these machinery. The accredited Forklift Operator Training Program is intended to provide trainees with the knowledge and practical skills to become an operator of a forklift.

There are forklift operation safety rules which should be followed pertaining to pre-shift inspections, and regulations for lifting and loading.

Prior to a shift beginning, an inspection checklist needs to be carried out and given to the Supervisor or Instructor. If whichever maintenance issue is discovered, the machine must not be operated until the issue is dealt with. To be able to indicate the machine is out of service, the keys should be removed from the ignition and a warning tag placed in a place which is visible.

Safety regulations for loading would consist of checking the load rating capacity on the forklift to determine how much the machinery can handle. When starting the equipment, the forks must be in the downward position. Don't forget that there is a loss of around 100 pounds carrying capacity for every one inch further away from the carriage which the load is carried.

To be able to safely lift a palletized load, drive the forklift toward the pallet and halt with the fork three inches from the load. Level the mast until it is at right angles to the load. Raise the forks to an inch beneath the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to alert other employees. Do not allow forks to drag on the ground.

Click to Download the pdf