Oakville Scissor Lift License

Oakville Scissor Lift License - The operation of scissor lifts carries an inherent chance of danger. Any type of powered machinery requires right handling in order to avoid accidents causing injury or damage. Businesses must make certain that staff using this particular machine have the needed training.

Untrained employees must not be allowed by their companies to use scissor lifts. The lift is made to lift materials and people to various heights. Failure to know and fully follow safety standard could cause injuries for the users or damage to the lift.

There are no regulations governing the utilization of fall protection for those who use scissor lifts. Nonetheless, manufacturers could recommend the use of fall protection and in several situations tying off in scissor lifts may be required by employer rules, local regulations or job-specific risk assessment.

To ensure that the scissor lift is in good working condition before utilizing the equipment, the operator needs to perform a thorough check. This is the operator's job, even though the unit has already been in service that day. The machine's operator's guidebook contains a checklist for pre-operation.

The things that an operator has to look for when performing a scissor lift check, includes checking tire-inflation pressure, and checking ground controls and platform controls to ensure they are working. Look for any delayed movement on the fly section when the boom is retracting and extending as this could indicate some loose cables. Whilst operating the controls, make certain that the emergency stop switches are working. Operate functions against the equipment's cutout switches. Test the boom control system by cycling a boom lift to the furthest extent of its operating envelope. Safety limiters should automatically stop the unit before it moves into an unstable position, if they are working properly. If they aren't, turn off the lift and make sure that repairs are made before using it again.

Proper and safe operating measures must be followed always. Levers must be operated with even, controlled pressure. A control lever must never be pushed from one position to the opposite position. The lever should be shifted to neutral, before stopping, and after that proceeding in the desired direction. When released, control switches and levers must automatically return to the neutral position. Depress the foot switch before operating platform controls.

Click to Download the pdf